More unique IPs than any network on the planet, in the world's largest residential pool. That's Shifter.More unique IPs than any network, in the world's largest pool. That's Shifter.

See the numbers

Geonode vs Rayobyte

Geonode vs Rayobyte: Proxy Comparison

If your work is long single-IP sessions, Geonode is on the list, and if it is growing premium workloads, so is Rayobyte; here both ran the same requests to the same targets.

15 figures compared · updated 11 mins ago
Geonode vs Rayobyte
Live
Geonode logo Geonode vs Rayobyte logo Rayobyte
  1. 80.3 Atlas Score 71.5
  2. 9.5/10 Success 1.0/10
  3. 810 ms Latency p50 888 ms
  4. 3.29M Unique IPs 2.10M
  5. 223 Countries 211
  6. $3.30 $ / 1k successes $7.49
  • Same requests
  • Same targets
  • No paid placement
  • Gaps shown, never filled
01 · Verdict

Which should you pick, Geonode or Rayobyte?

Geonode puts long session hold first; Rayobyte puts premium traffic at volume first; here are the Atlas Scores that test both pitches.

Geonode leads on 11 15 figures compared Rayobyte leads on 4
Geonode logo

Geonode

#5
Atlas Score 80.3 A

Choose Geonode to

  • Waste less on failures
  • Scrape at volume for less
  • Spend less on retries
Rayobyte logo

Rayobyte

#16
Atlas Score 71.5 B

Choose Rayobyte to

  • Load more pages unchallenged
  • Land more e-commerce requests
  • Check AI overviews reliably
Next · 02 Side by side How do they compare on every figure?
02 · Side by side

Geonode and Rayobyte side by side

If the sticky-session angle of Geonode or the volume-tier angle of Rayobyte drew you here, check it against every measured figure, leaders in green.

Geonode and Rayobyte compared on every measured figure
Metric
Verdict
Atlas Score 80.3 80.3 80.3 71.5 71.5 71.5
Rank #5 #5 #5 #16 #16 #16
Performance
Success 9.3/10 9.5/10 9.5/10 1.3/10 1.0/10 1.0/10
Latency p50 824 ms 810 ms 810 ms 969 ms 888 ms 888 ms
Challenge score 4.6/10 5.1/10 5.1/10 8.4/10 7.9/10 7.9/10
Requests 2.01M 6.72M 6.72M 1.81M 5.66M 5.66M
Availability 100.00% 99.95% 99.95% 100.00% 99.94% 99.94%
Weighted degradation 0 min 2 min 2 min 0 min 2 min 2 min
Pool
Unique IPs 1.05M 3.29M 3.29M 839K 2.10M 2.10M
Countries 219 223 223 201 211 211
Regions 2.4K 2.6K 2.6K 2.5K 2.7K 2.7K
Cities 42K 56K 56K 46K 61K 61K
ASNs 15K 18K 18K 14K 18K 18K
Trust
DC ASN share 0.03% 0.03% 0.03% 2.78% 2.41% 2.41%
Exclusive IPs 578K 1.42M 1.42M 284K 653K 653K
Likely upstream None found None found None found None found None found None found
Peer consent disclosed Yes Yes Yes Yes Yes Yes
Cost
$ / GB $0.59 $0.59 $0.59 $1.50 $1.50 $1.50
Cost per 1,000 successes $3.30 $3.30 $3.30 $7.49 $7.49 $7.49
Trial Paid trial Paid trial Paid trial $5.00 · 10 GB · 3 days Start trial Free trial Free trial Free trial Start trial

Best third of all networks Middle third Bottom third Not measured yet

Next · 03 By target Which works better on the sites you use?
03 · By target

How Geonode and Rayobyte do per site

Per target, Geonode and Rayobyte can split even when averages are close, which matters for long single-IP sessions and growing premium workloads alike.

Geonode Rayobyte
  1. 6.3/10 HTTP 1.5/10
  2. 5.8/10 HTTPS 1.0/10
  3. 1.6/10 Marketplace 2.9/10
  4. 1.6/10 Search 2.9/10
  5. Not measured Profile 7.4/10
  6. 5.5/10 Social 7.2/10
  7. 4.5/10 Challenge Not measured
  8. 3.6/10 AI 9.5/10
  1. 7.4/10 HTTP 1.5/10
  2. 6.3/10 HTTPS 1.0/10
  3. 1.5/10 Marketplace 7.6/10
  4. 1.0/10 Search 2.6/10
  5. 3.1/10 Profile 4.2/10
  6. 7.4/10 Social 8.1/10
  7. 5.5/10 Challenge 8.7/10
  8. 3.1/10 AI 8.9/10
  1. 7.4/10 HTTP 1.5/10
  2. 6.3/10 HTTPS 1.0/10
  3. 1.5/10 Marketplace 7.6/10
  4. 1.0/10 Search 2.6/10
  5. 3.1/10 Profile 4.2/10
  6. 7.4/10 Social 8.1/10
  7. 5.5/10 Challenge 8.7/10
  8. 3.1/10 AI 8.9/10

What each target tests, and why it is hard: the target suite

Next · 04 Price Which is cheaper, Geonode or Rayobyte?
04 · Price

Geonode vs Rayobyte pricing

Comparing per-GB traffic and subscriptions at Geonode with premium volume tiers at Rayobyte is hard on rate cards alone, so cost per success sits beside them.

Geonode logo Geonode

  • Rate card

    $0.27 to $0.88

    per GB

  • $ / 1k successes

    $3.30

    $3.30

    $3.30

  • Trial

    Paid trial

    $5.00 · 10 GB · 3 days

Rayobyte logo Rayobyte

  • Rate card

    $0.70 to $3.50

    per GB

  • $ / 1k successes

    $7.49

    $7.49

    $7.49

  • Trial

    Free trial

The bill for successful requests

What Geonode and Rayobyte bill for a fixed number of successful requests
Successful requests GeonodeRayobyte
10,000 $33$75
100,000 $330$749
1,000,000 $3,302$7,494
10,000,000 $33,025$74,944
10,000 $33$75
100,000 $330$749
1,000,000 $3,302$7,494
10,000,000 $33,025$74,944
10,000 $33$75
100,000 $330$749
1,000,000 $3,302$7,494
10,000,000 $33,025$74,944
Successful requests only, for the target and time window picked, at each network's 200 GB plan price, retries included. A minimum monthly spend is not added: see the network's page.

Every measured network priced the same way: the true cost of residential proxies

Next · 05 IP pool Which has the better IP pool?
05 · IP pool

Geonode vs Rayobyte: exit IPs

Since Geonode sells sessions that keep one IP for long and Rayobyte sells premium access in volume tiers, this section checks distinct IPs, residential share and overlap.

Geonode Rayobyte
  1. 1.05M Unique IPs 839K
  2. 219 Countries 201
  3. 42K Cities 46K
  4. 15K ASNs 14K
  5. 0.0% Datacenter ASN share 2.8%
  1. 3.29M Unique IPs 2.10M
  2. 223 Countries 211
  3. 56K Cities 61K
  4. 18K ASNs 18K
  5. 0.0% Datacenter ASN share 2.4%
  1. 3.29M Unique IPs 2.10M
  2. 223 Countries 211
  3. 56K Cities 61K
  4. 18K ASNs 18K
  5. 0.0% Datacenter ASN share 2.4%

IPs seen on both Geonode and Rayobyte

165K

IPs seen on both pools in this window.

15.7% of the IPs seen on Geonode

23.2% of the IPs seen on Rayobyte

828K

IPs seen on both pools in this window.

25.2% of the IPs seen on Geonode

30.7% of the IPs seen on Rayobyte

828K

IPs seen on both pools in this window.

25.2% of the IPs seen on Geonode

30.7% of the IPs seen on Rayobyte

How pool overlap is measured
Next · 06 Guide How do you choose between Geonode and Rayobyte?
06 · Guide

How to choose between Geonode and Rayobyte

A practical guide: Geonode starts with per-GB or a subscription and Rayobyte starts on a lower volume tier, so here is what to compare first and how to test.

Checklist

What matters in Geonode vs Rayobyte

Success on the sites you scrape

Buyers who need long sessions and buyers whose usage keeps growing rarely share the same targets, so look up your own sites in the per-target table before choosing Geonode or Rayobyte.

Cost per successful request

A per-GB price hides failed requests, so compare Geonode, which lets you pay per GB or subscribe, and Rayobyte, which sells by volume tier, by the cost of each successful request.

Unique IPs, not the advertised pool

Neither the standing of Geonode as a name for long sticky sessions nor that of Rayobyte as a premium network sold by volume tells you how many distinct IPs you will see; the measured count does.

How residential each pool is

Hosting and datacenter addresses get blocked, and that matters whether Geonode is built around long sticky sessions or Rayobyte is built around premium traffic at volume; check how residential each pool really is.

Coverage where you need it

Buyers leaving Geonode for a new mix of session length and price and buyers leaving Rayobyte for good rates without a higher tier should still confirm coverage in their own countries, cities and ASNs.

How the IPs are sourced

Check sourcing with a provider known for long sessions and a long-established volume seller alike: whether Geonode and Rayobyte get peer consent and verify customers, as the side by side table shows.

Related reading: What to test in a proxy free trial

Geonode vs Rayobyte: the method

Same requests, same targets

To keep it fair, Geonode as a name for long sticky sessions and Rayobyte as a premium network sold by volume were measured on identical requests and targets, on one schedule.

Read the full methodology, or download the dataset.

  • Same requests to the same targets
  • Same schedule and measurement window
  • Published formula for the Atlas Score
  • Gaps shown as Not measured, never filled

Checking Geonode and Rayobyte yourself

Try Geonode, which sells a paid trial and starts with per-GB or a subscription, and Rayobyte, which offers a free trial and starts on a lower volume tier; price by success, move in stages. What to test in a proxy free trial

FAQ

Frequently asked questions

What buyers ask when weighing the sticky-session offer of Geonode against the volume-tier offer of Rayobyte.

On Atlas Score, Geonode comes first with 80.3 against 71.5, but the rows are split: Geonode leads 11 of the 15 shared figures and Rayobyte leads 4.

Counting only requests that succeed, Geonode is the cheaper of the two at $3.30 per 1,000 successful requests, against $7.49.

Geonode is faster, with a median latency of 810 ms against 888 ms.

Geonode is more reliable, with a success score of 9.5/10 across every target against 1.0/10.

By distinct IPs handed out in testing, Geonode has more: 3,286,685 against 2,101,773.

Yes, to a degree: Atlas saw 828,189 IPs on both Geonode and Rayobyte.

Geonode is a per-GB and subscription network and Rayobyte is a volume-tier premium network. Buyers who need long sessions tend to pick Geonode, buyers whose usage keeps growing tend to pick Rayobyte, and the tables above compare them figure by figure.

Yes for most clients: the gateway host, port and username change, and Rayobyte sells by volume tier while Geonode lets you pay per GB or subscribe. Test Rayobyte first, with the volume tier you actually land in next to the choice between per-GB and subscription.

Get started

Test both on your own targets

Pick by your own results: Geonode puts long session hold first, Rayobyte puts premium traffic at volume first, and only your targets show which matters more.

3-day money-back guarantee. Cancel anytime.